Fagor 3CC-239EX Manuale Utente Scaricare il pdf (Pagina 12)

12

Hood Description - Fig. 1

1. Light Switch

2. Motor Speed Switch

3. Light Covers - illumination of the Cooking

Surface

4. Grease Filters

5. Grease Filter Support Grate (the grease filters

are located inside).

6. Light Cover Supports

7. Pull-Out Drawer

Using the hood

The hood is provided with several speeds. For

the best performance, we recommend using the

low speeds in normal conditions and the high

speeds in particular cases of strong odour and

vapour concentration.

Pull out the drawer to access the control panel.

We recommend starting up the hood a few

minutes before cooking and keeping it running

until all the odours have been eliminated.

Model with Self-supporting Metal

Filters

Removing the Grease Filters

- Fig. 2

a. Remove the pull-out drawer completely.

b. Press the side handles A towards the opposite

side and remove the filters.

Putting the Filters Back in Place

a. Remove the pull-out drawer completely and

mount the grease filter so that it covers the

drawer.

b. Close the drawer and install the remaining

grease filter.

Opening the Light Cover Support

- Fig. 2

a. Remove the pull-out drawer completely.

b. Push the B knobs inwards toward each other

(in the “Open” direction as indicated on the

plastic knob itself).

Model with Grease Filter Support

Grates

Opening the Grease Filter Support Grates

- Fig. 3

a. Extract the pull-out drawer completely.

b. Push the B knobs inwards toward each other

(in the “Open” direction as indicated on the

plastic knob itself).

c. To remove the grates completely, use the N

spring fasteners, which act as pins to hold the

grate in place (Fig. 4).

GB

Maintenance

Before performing any maintenance operation,

isolate the hood from the electrical supply by

switching off at the connector and removing the

connector fuse.

Or if the appliance has been connected through

a plug and socket, then the plug must be removed

from the socket.

Metal Grease Filter

The metal grease filter serves to trap grease

particles by suspending them.

The metal grease filter lasts forever and must be

washed either by hand or in the dishwasher

(65°C) with suitable detergents.

The grease filters must be washed at least

once a month.

Let the filter dry without damaging it before putting

it back into place.

Removing the Grease Filters (for models

wtih grease filter support grates)

a. Isolate the hood from the electrical supply.

b. Extract the pull-out drawer completely.

c. Open the grates that support the grease

filters.

d. Remove the L fasteners for the grease filter

and remove it (Fig. 5).

When washing the grease filter, wash the grate

as well with warm soapy water.

Carbon filter

This filter dissolves cooking odours.

The carbon filter must never be washed.

It should be changed every 4 months in

normal use.

Mounting the carbon filter:

a. Isolate the hood from the electrical supply.

b. Extract the pull-out drawer completely.

c. Remove the grease filters and open the light

cover support (or the grease filter support

grates).

d. Install the charcoal filter so that it covers the

plastic grate which protects the ventilation fan

(Fig. 6).

e. Turn the center handle of the carbon filter in

the clockwise direction until it locks in place.

f. Refit the grease filters and the light cover

support (or the grease filter support grates).

Removing the carbon filter:

Turn the center handle of the carbon filter in the

counterclockwise direction and remove the filter

from its seat

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Commenti su questo manuale

Nessun commento